Product ID:UNICOR, TYPE J, CORROSION INHIBITOR
MSDS Date:01/01/1989
FSC:6850
NIIN:00-292-9780
MSDS Number: BDVSY

Emergency Phone: 708-391-2123/800-424-9300(CHEMTREC)

Info Phone: 708-391-2123

Cage: 02QC3

Telephone: 847-391-2953

Cage: 02QC3

UNSATURATED DIMER FATTY ACID

CAS: 61788-89-4

Fraction By Weight: 40-70%

OSHA PEL NONE ESTABLISHED

ACGIH TLV: NONE ESTABLISHED

AROMATIC SOLVENT

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:REPEATED OR PROLONGED INHALATION OF
SOLVENT VAPORS MAY CAUSE IRRITATION OF THE RESPIRATORY TRACT.
INHALATION OF HIGH SOLVENT VAPOR CONCENTRATIONS MAY CAUSE
DIZZINESS, HEADACHES, RESPIRATORY PROBLEMS O R CENTRAL NERVOUS
SYSTEM DEPRESSION. SOLVENTS ARE KNOWN TO REMOVE THE NATURAL OILS
FROM THE SKIN. MAY CAUSE DERMATITIS.
Effects of Overexposure:IRRITATING TO EYES & SKIN. PROLONGED SKIN
EXPOSURE COULT RESULT IN DERMATITIS.

First Aid:SKIN: APLY A GENEROUS AMOUNT OF WATERLESS HAND CLEANER TO THE
AFFECTED AREA. RUB BRISKLY ONTO THE SKIN, ON AND AROUND THE
AFFECTED AREA. REMOVE THE MIXTURE OF CLEANER-ADDITIVE WITH PAPER
TOWELS OR CLE AN, DRY RAGS; EYE: FLUSH WITH LARGE AMOUNTS OF WATER
FOR 15 MINUTES; INHALE: REMOVE TO FRESH AIR & GET MEDICAL
ATTENTION; INGEST: DO NOT INDUCE VOMITING. GET MEDICAL ASSISTANCE.

Flash Point Method:PMCC
Flash Point:>149F/65C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:MAY PRODUCE IRRITATING OR POISONOUS GASES.

Spill Release Procedures:ISOLATE THE AFFECTED AREAS AND KEEP OUT ALL
UNAUTHORIZED PERSONNEL. CONFINE ENTRY TO THE CONTAMINATED AREA TO
THOSE PERSONS WHO ARE PROPERLY PROTECTED. REMOVE SOURCES OF
IGNITON. CLEAN UP CONTAMINATED SURFACE WITH A GENEROUS AMOUNT OF
OIL ABSORBENT.

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED, PROPERLY
LABELED CONTAINERS IN COOL, WELL-VENTILATED AREA AWAY FROM ALL
IGNITION SOURCES. AVOID CONTACT WITH EYES/SKIN.
Other Precautions:NEVER USE WELDING OR CUTTING TORCH ON OR NEAR
DRUM(EVEN EMPTY) BECAUSE MATERIAL CAN IGNITE WXPLOSIVELY.

Respiratory Protection:WHERE NATURAL VENTILATION IS INADEQUATE, USE
MECHANICAL VENTILATION, OTHER ENGINEERING CONTROLS OR A
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS TO PREVENT
INHALATION OF PRODUCT VAPORS.
Ventilation:GOOD GENERAL MECHANICAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL GOGGLES.
Supplemental Safety and Health
VAP-PRES:NIL.MFR SAYS"THE AROMATIC HYDROCARBON SOLVENT USED IN THIS
PRODUCT HAS A BTX(BEZENE,TOLUENE,XYLENE)CONTENT OF <4.0% W/NO
DETECTABLE BENZENE."

HCC:V4
Boiling Pt:B.P. Text:>270F/132C
Vapor Pres:<10
Vapor Density:>1
Spec Gravity:0.93
pH:<7
Solubility in Water:NIL
Appearance and Odor:CLEAR STRAW-COLORED LIQUID WITH HYDROCARBON ODOR.

Stability Indicator/Materials to Avoid:YES
REACTIVE WITH MINERAL ACIDS AND BASES.
Stability Condition to Avoid:THERMAL DECOMPOSITION.
Hazardous Decomposition Products:CARBON MONOXIDE, OXIDES OF NITROGEN
AND OTHER IRRITATING OR POISONOUS GASES.

Waste Disposal Methods:WASTE MATERIAL, INCLUDING CONCENTRATED LIQUIDS,
CONTAMINATED ABSORBENT AND MATERIALS FROM SPILL CLEAM-UP
PROCEDURES, MUST BE HANDLED IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.